The Toyota Camry Atara S is a real car — but it belonged to the 2012–2017 generation in Australia, not to the 2019 model year, and it was never a United States or Canadian grade. Buyers looking for a 2019 Camry engine guide should know that the car Toyota actually sold in 2019 was the eighth-generation XV70, wearing different trim names and using new engines.

What the Atara S Badge Was
Toyota Australia introduced the Atara sub-brand with the XV50 Camry in 2012. The local range used the names Altise, Atara S and Atara SL, and the V6 Aurion used Atara S, Atara SL and Atara Sport. The Atara S was therefore a grade level, not a separate model, and it sat above the volume Altise but below the Atara SL.
Australian Camry and Aurion production ended in 2017. When the all-new XV70 Camry arrived in Australia in late 2017, imported from Japan, Toyota dropped the Atara name and adopted Ascent, Ascent Sport, SX and SL instead. There was no 2019 Atara S.

Atara S Engine and Output
The Atara S used the 2.5-liter naturally aspirated four-cylinder engine coded 2AR-FE, paired with a six-speed automatic transmission and front-wheel drive.
| Specification | Atara S (XV50) |
|---|---|
| Engine | 2.5 L 2AR-FE inline-4, dual VVT-i |
| Power | 133 kW (about 178 hp) at 6,000 rpm |
| Torque | 231 Nm (about 170 lb-ft) at 4,100 rpm |
| Transmission | 6-speed automatic |
| Drive | Front-wheel drive |
| Combined fuel use | 7.9 L/100 km |
Redbook, the Australian specification source used by carsales, lists some XV50 Camry 2.5-liter variants at a slightly higher 135 kW and 235 Nm, so exact figures vary a little between trim listings. Either way, the Atara S was a modest, reliable gasoline sedan rather than a performance model.
The 2019 Replacement: The XV70 Camry
The XV70 Camry moved to Toyota’s TNGA GA-K platform, which lowered the center of gravity and stiffened the body. It was a four-door front-wheel-drive sedan, built in Japan for Australia and in the United States for North America. The move to TNGA is the single biggest change between the Atara-era car and the 2019 car.

2019 Engines and Specifications
For the Australian market in 2019, Toyota offered three powertrains. The gasoline four-cylinder produced 133 kW and 231 Nm. The hybrid combined a 2.5-liter engine with an electric motor for a total of 160 kW. The V6, offered in the SL, produced 224 kW and 362 Nm. Transmissions were a six-speed automatic, an eight-speed automatic for the V6 and a CVT for the hybrid.
| Version | Output | Transmission |
|---|---|---|
| 2.5 L gasoline inline-4 | 133 kW (178 hp); 231 Nm | 6-speed automatic |
| 2.5 L hybrid | 160 kW (215 hp) combined | CVT |
| 3.5 L V6 (SL) | 224 kW (300 hp); 362 Nm | 8-speed automatic |
North American cars used different engine options again, led by a 2.5-liter four-cylinder and an available V6, so figures in the U.S. and Canada do not match the Australian ones exactly.
In the United States the same generation was sold with a 2.5-liter four-cylinder, an optional 3.5-liter V6 and a hybrid, and it was assembled in Georgetown, Kentucky. So a 2019 Camry owner in North America and a 2019 Camry owner in Australia were driving cars that shared a platform but not a nameplate or a trim structure.
The earlier Atara S and Atara SL from the XV50 generation were awarded a five-star ANCAP safety rating in 2013 and came with seven airbags and electronic stability control. Higher grades added low-speed autonomous emergency braking, blind-spot monitoring and rear cross-traffic alert.
Buyers shopping used Atara S cars today should check the automatic transmission service history and confirm the car is an Australian-delivered example rather than a gray import, because the Atara name was never used in other markets.
The V6 SL was the quickest and least common version of the 2019 Australian line-up, and it is now the most sought-after car of that range. The hybrid remained the choice for fleet and taxi operators, for whom lower running costs mattered more than outright performance.
Toyota built the Camry in Australia for more than 50 years, and the end of local production in 2017 was a significant moment for the Australian car industry. The switch to an imported Camry marked the end of an era for the nameplate there.
Interior and Equipment
The 2019 Camry cabin was a clear step up from the XV50. It had a driver-focused dashboard, a standard touchscreen infotainment system with smartphone connectivity, a reversing camera and, on higher grades, dual-zone climate control, keyless start and a head-up display. The hybrid added an energy monitor to the display.

Dimensions and Pricing
The XV70 Camry measured 4,885 mm in length, 1,840 mm in width and 1,445 mm in height, on a 2,825 mm wheelbase. Australian prices at the time ran from about AUD 31,500 to AUD 48,500 depending on grade and powertrain. The earlier Atara-era XV50 was slightly shorter, at 4,850 mm on a 2,775 mm wheelbase.
Availability and the Atara Legacy
The Atara name was used only in Australia and New Zealand, and it has no equivalent in the U.S. or Canadian ranges. If a buyer sees an “Atara S” for sale, it is a 2012–2017 locally built car; a 2019 Camry will instead be an Ascent, SX or SL. Readers can compare related cars in our 2019 Toyota Camry Atara SX and 2019 Toyota Camry Atara R articles. This feature is part of our wider Toyota Review coverage.




