The 2019 Toyota Mirai is the first generation of Toyota’s hydrogen fuel-cell sedan, coded JPD10. It went on sale in Japan in December 2014 and reached the United States and Europe in 2015, with model years running from 2015 to 2020. Rather than burning gasoline, the Mirai generates electricity from hydrogen in an onboard fuel cell, and its only emission is water vapor.

How the Fuel Cell Powertrain Works
The Mirai carries no combustion engine and no plug-in charging port. Hydrogen stored in two carbon-fiber tanks is fed to a polymer-electrolyte fuel cell stack, where it reacts with oxygen drawn from the air to produce electricity. That electricity drives an electric motor and charges a small buffer battery. Toyota called the system the Toyota Fuel Cell System, and it combines fuel-cell technology with hybrid technology. The first-generation fuel cell stack had a maximum output of 114 kW (155 PS) and a volume power density of 3.1 kW per liter.

Performance and Range
| Component | Output | Torque | Drive |
|---|---|---|---|
| Electric motor (4JM) | about 153 hp (113 kW) | 247 lb-ft (335 Nm) | Front-wheel drive |
| Buffer battery | 1.6 kWh nickel-metal hydride | – | – |
| EPA range | 312 miles (502 km) | 67 mpg combined | – |
The Mirai’s electric motor produces about 153 hp and 247 lb-ft of torque, driving the front wheels through a single-speed transmission. Toyota quoted a 0-60 mph time of roughly nine seconds and a top speed of 111 mph. The EPA rated the car at 312 miles of range and 67 mpg combined, and the motor’s instant torque makes it feel responsive from a standstill despite its modest power figure.
Refueling and the Hydrogen Network
Refueling takes about five minutes at a hydrogen station, comparable to filling a gasoline tank and far quicker than charging a battery-electric car. The trade-off is infrastructure. In 2019 the Mirai was sold only in markets with a hydrogen refueling network, chiefly California in the United States and parts of Japan and Europe. The two tanks store hydrogen at 70 MPa (about 700 bar), and the car’s total hydrogen capacity is about 122 liters. Toyota designed the tanks to resist impact and fitted shut-off valves to isolate them in a crash.
Dimensions and Interior
The first-generation Mirai measures 4,890 mm long, 1,815 mm wide and 1,535 mm tall, with a 2,780 mm wheelbase and a curb weight of about 1,850 kg. It seats five, with a trunk of about 361 liters. Standard equipment included heated seats trimmed in synthetic leather, a premium audio system, navigation and acoustic glass to reduce noise. The layout is a four-door sedan rather than a hatchback, and the cabin is trimmed to a higher standard than Toyota’s mainstream sedans.


Pricing and Ownership
In the United States the 2019 Mirai carried an MSRP of $58,500. Toyota offered buyers a hydrogen fuel card and other incentives to offset the limited refueling network and the car’s high price, and it was sold or leased mainly in California. Because the model was intended to prove the technology rather than to sell in large numbers, it was produced in small batches at Toyota’s Motomachi plant in Japan.
Where It Was Sold
The Mirai launched in Japan, Europe and North America, but availability was limited by hydrogen infrastructure. In the US it was offered only in California, which had the country’s only public hydrogen stations at the time. In Europe it was sold in a handful of countries, including Germany and the United Kingdom. That limited footprint is one reason the first-generation car remained rare, and it also made the model dependent on government and industry support for hydrogen fueling.
The 2021 Redesign
Toyota unveiled a second-generation Mirai in October 2019, and it went on sale in December 2020 as a rear-wheel-drive sedan on the GA-N platform. The new car raised output to 182 hp, extended the EPA range to 402 miles and used three hydrogen tanks for more capacity. The first-generation Mirai it replaced is the model that corresponds to the 2019 model year. For related Toyota coverage, see the 2019 Toyota Prius Plug-in Hybrid Redesign and Review and the 2019 Toyota Rukus Review.

What the Name Means and How It Was Built
“Mirai” is the Japanese word for “future”, a name Toyota chose to signal that the car represented a new kind of propulsion rather than an evolution of the gasoline engine. Toyota began developing fuel-cell technology in 1992, more than two decades before the Mirai reached customers, and built the first-generation car at its Motomachi plant in Toyota City, Aichi. The fuel cell stack and the high-pressure hydrogen tanks were both developed in-house, which Toyota identified as a key advantage of the project.
Safety and Structure
Because hydrogen is stored at 70 MPa, Toyota designed the tanks from carbon fiber and subjected them to impact tests before production, and it fitted sensors and shut-off valves to isolate them in a crash. The body used high-strength steel to protect the fuel cell and tanks, and the car carried the same suite of airbags and electronic stability aids as Toyota’s conventional sedans.
The Limits of the First Generation
The first-generation Mirai was a proof of concept as much as a product. Its range was shorter than that of many gasoline cars, hydrogen stations were scarce, and at $58,500 it was expensive for a mid-size sedan. Toyota addressed those points with the second-generation car, which added range and moved to a more conventional rear-wheel-drive layout, but the limited refueling network remained the technology’s main constraint for years.



