2020 Toyota Aurion Engine Specs and Release Date

2020 Toyota Aurion: Engine Specs and the Real Production History

The Toyota Aurion was built in Australia from 2006 to 2017. Its 3.5-liter V6 specs, trims and the reason there was no 2020 Aurion, explained.

There was no 2020 Toyota Aurion. The Aurion was a front-wheel-drive sedan built by Toyota in Australia and sold mainly in Australia and New Zealand, and its production ended in 2017. Toyota assembled roughly 111,140 of them over an eleven-year run before closing its Altona factory near Melbourne. This article sets the record straight on the model years and covers the genuine engine specifications, trims and history of the car.

Toyota Aurion engine specs and release date

What the Aurion Was

The Aurion was a large family sedan derived from the Camry but positioned as a more powerful, more luxurious alternative. It replaced the Toyota Avalon in Australia and New Zealand in 2006. Two generations were built: the first, coded XV40, from 2006 to 2012, and the second, coded XV50, from 2012 to 2017. In several Asian markets the same car was sold as the Camry, while Australia and New Zealand kept the separate Aurion name.

Toyota confirmed the end of production in 2017, when the last Aurion left the Altona line ahead of the plant’s closure later that year. The car’s role was taken over by the imported V6 version of the Toyota Camry, which reintroduced a six-cylinder Camry to Australia for the first time since 2006.

Toyota Aurion engine

Engine and Specifications

Both generations of Aurion used the same basic powertrain: a 3.5-liter, 2GR-FE V6 gasoline engine driving the front wheels through a six-speed automatic transmission. On regular unleaded fuel it produced 200 kW, which Toyota quoted as 268 hp or 272 PS, and 336 Nm (248 lb-ft) of torque, with peak torque arriving at 4,700 rpm. Toyota’s combined fuel-economy figure under Australian ADR testing was 9.9 L/100 km. At its launch Toyota described the engine as the most powerful naturally aspirated V6 it had offered in an Australian passenger car to that point.

SpecificationAurion (XV40 and XV50)
Engine3.5-liter 2GR-FE V6
Power200 kW (268 hp / 272 PS)
Torque336 Nm (248 lb-ft) at 4,700 rpm
Transmission6-speed automatic
DriveFront-wheel drive
Fuel economy9.9 L/100 km (ADR combined)
Production2006 to 2017
Toyota Aurion exterior

The High-Performance TRD Aurion

Toyota briefly offered a high-performance version through its Toyota Racing Development division. Launched in August 2007, the TRD Aurion used a supercharged 2GR-FZE V6 producing 241 kW (323 hp) and 400 Nm of torque, paired with the same six-speed automatic. It also gained a body kit and chassis upgrades. The model was discontinued in March 2009 after only 537 examples were built, making it one of the rarest Australian Toyotas.

Toyota Aurion interior

Trims and Interior

Aurion trims varied by generation. The first generation offered the AT-X, Sportivo GT and Presara, while the second generation used the AT-X, Sportivo SX6, Sportivo ZR6, Prodigy and Presara before a 2015 facelift consolidated the range into AT-X, Sportivo and Presara. Standard equipment across the line included six airbags and electronic stability control, with the Presara adding luxury touches aimed at the executive-sedan market.

What Buyers Can Actually Buy

Anyone looking for a large Toyota sedan in 2020 or later is really shopping two options: a used Aurion, or the V6 version of the imported Toyota Camry that succeeded it. The Aurion is a used-only proposition, with the second-generation XV50 cars sold between 2012 and 2017 representing the newest examples. Buyers comparing related models can also consider the 2020 Toyota Sienna AWD for a larger six-cylinder Toyota, or the Toyota Alphard Hybrid for a different take on a spacious Toyota.

Relationship to the Camry

The Aurion shared its basic structure, interior and center body with the Camry but wore different front and rear styling and used the V6 exclusively in Australia. In several Asian markets the same car was sold simply as the Camry, which is why the Aurion can resemble a Camry with a different nose to observers who only met it under the Camry badge. In Australia and New Zealand, Toyota sold the four-cylinder Camry and the V6 Aurion side by side.

Trims and Facelift

The first-generation Aurion was sold in AT-X, Sportivo GT and Presara trims. The second generation, launched in Australia in April 2012, initially offered AT-X, Sportivo SX6, Sportivo ZR6, Prodigy and Presara. A mid-life update arrived in 2015, when Toyota simplified the range, deleting the Prodigy and combining the two Sportivo grades into a single Sportivo, leaving AT-X, Sportivo and Presara.

Production and Exports

Toyota built the Aurion at its Altona plant in Melbourne from 2006 until August 2017. Over that run, around 111,140 were sold in Australia and a further 70,000 were built for export. The model was part of the broader Australian manufacturing operation that Toyota shut down in 2017, a decision that ended local production of the Camry and Aurion in the country.

Fuel consumption was the Aurion’s main running-cost drawback: a 3.5-liter V6 in a front-wheel-drive sedan used more fuel than the four-cylinder Camry, and the official 9.9 L/100 km combined figure translated to fairly high real-world consumption in city driving. Buyers who prioritized economy generally chose the Camry Hybrid instead.

Buying a Used Aurion

Because the newest Aurions date from 2017, every example is now a used car. The V6 and six-speed automatic were a durable combination, and the sedan’s large body and simple mechanical layout make it straightforward to service. The main considerations are the model year, since the XV50 brought a more refined interior and updated safety equipment, and condition, given the age of even the youngest cars. Sellers often price the Presara above the Sportivo and AT-X because of its extra equipment.

Sources